Equestrian Helmet Safety Standards: VG1 vs ASTM F1163 | Equestrian Max Skip to main content
BS EN 13158 TACK & STIRRUPS • GERMAN SILVER & 316L LORINERY FOUNDRY
Saddlery Craft, Bit Metallurgy & Farrier Engineering Brief

European Riding Helmets vs International Safety Certifications: Impact Attenuation & Equestrian Shell Engineering

Comparative engineering analysis of equestrian riding helmet safety certifications: VG1 01.040 (CE), ASTM F1163-15, EPS foam density, and multi-directional impact mitigation.

European Riding Helmets vs International Safety Certifications: Impact Attenuation & Equestrian Shell Engineering
Reviewed against FEI tack regulations, high-copper German Silver bit metallurgy, Chrome-Vanadium farrier forging, and equine dental standards.
On this page (13)
  1. European VG1 01.040 vs. ASTM F1163 Helmet Safety Standards: Impact Attenuation & Equestrian Shell Engineering
  2. Executive Overview and B2B Procurement Context
  3. Understanding the Standards and Their Impact Methodology
  4. Comparative Technical Specification
  5. Shell Engineering: Polycarbonate, ABS and Composite Construction
  6. EPS Shock-Liner Engineering
  7. Harness, Buckle and Retention-System Engineering
  8. Metallurgy and Adjacent Equestrian Hardware
  9. Leather Engineering for Complementary Saddlery Programs
  10. Cooling Airflow Channel Aerodynamics
  11. Sialkot Manufacturing and Quality-Control Checkpoints
  12. Buyer RFQ and OEM Ordering Checklist
  13. Related Equestrian Equipment Manufacturing

European VG1 01.040 vs. ASTM F1163 Helmet Safety Standards: Impact Attenuation & Equestrian Shell Engineering

Executive Overview and B2B Procurement Context

For an equestrian helmet, certification is not established by shell appearance, liner thickness, or a supplier’s statement that a model is “CE approved.” The relevant question is whether the complete helmet assembly—outer shell, energy-absorbing liner, harness, visor, retention points and finished dimensional geometry—has passed the applicable equestrian helmet standard in the exact configuration offered for sale.

VG1 01.040, ASTM F1163 and Snell E2021 use related but non-identical impact methods, headforms, test velocities, conditioning sequences and acceptance criteria. A helmet certified to one standard should not be represented as certified to another without a separate conformity assessment. This distinction is material for:

  • Tack distributors: import documentation, market-specific labeling, SKU control and claims substantiation.
  • Professional riders and riding schools: competition eligibility, replacement intervals and consistent fit across multiple head shapes.
  • Farriers: protection during close-range work, where a horse may strike or dislodge headgear while the operator is bending beside the limb.
  • Equine veterinary hospitals: procurement of helmets for yard staff, ambulatory teams and treatment-area personnel exposed to unpredictable equine movement.
  • OEM buyers: control of mold geometry, liner density, harness anchorage and certification traceability across private-label production.

Equestrian Max manufactures and sources complete equestrian equipment programs through its Sialkot production network. Helmet projects are handled as controlled safety products rather than as decorative riding accessories. The product specification must identify the target market, the exact standard revision, the shell and liner construction, the harness system, the marking package and the laboratory evidence required before shipment.

Understanding the Standards and Their Impact Methodology

VG1 01.040

VG1 01.040 is the European technical specification historically used for riding helmets and commonly associated with the European CE conformity route. It is frequently referenced as VG1 01.040 2014-12. The model is assessed as a complete helmet, including impact attenuation, retention, field of vision, projections, visor behavior, construction and marking requirements.

The commonly cited VG1 impact sequence uses approximately 60 J of impact energy, generated by a specified falling headform and anvil arrangement. The exact acceptance decision is not based on Joules alone. The laboratory also evaluates transmitted acceleration, test location, conditioning state, headform size, anvil configuration and whether the helmet remains retained and structurally serviceable after the prescribed impacts.

For European procurement, buyers should require the applicable Declaration of Conformity or certification documentation, the notified or accredited laboratory report where available, the exact model designation, size range and production revision. A visually identical shell with a revised liner, harness, visor or mold is not automatically covered by the original report.

ASTM F1163

ASTM F1163 is the North American equestrian protective headgear specification. Its drop tests are also commonly described around a 60 J impact energy level, but the test apparatus, headform dimensions, impact sites, conditioning and pass criteria differ from VG1. ASTM F1163 certification is therefore not an interchangeable substitute for VG1 certification.

ASTM projects must be controlled by the revision stated in the purchase order and laboratory report. ASTM F1163-15, ASTM F1163-23 and subsequent revisions may contain altered wording, test details or administrative provisions. The buyer should never accept “ASTM tested” without the revision, laboratory identity, model number, size range and confirmation that the production configuration matches the tested article.

Snell E2021

Snell E2021 is a more demanding voluntary equestrian helmet standard used by some manufacturers and specialist buyers. It is not simply a different label for ASTM F1163. Snell testing uses its own impact velocities, impact locations, headforms, conditioning and pass/fail requirements. The E2021 protocol includes severe impact conditions and evaluates both impact attenuation and retention behavior under its own defined test system.

Snell certification should be verified through the Snell Foundation’s certification records or a current certificate issued for the precise model. A helmet may carry both ASTM and Snell markings, but dual marking requires evidence that the same production configuration has passed both programs.

Why Joules Alone Are Not a Sufficient Purchasing Criterion

Impact energy is calculated from the mass and velocity of the falling system. In simplified form, E = ½mv². Two tests can use similar nominal energy while producing different results because of headform mass, velocity, anvil radius, contact area, liner compression rate, impact angle and shell stiffness.

The procurement file should therefore record:

  • Impact energy or specified impact velocity.
  • Headform mass, size and geometry.
  • Anvil type, radius and surface condition.
  • Impact locations and number of impacts.
  • Environmental conditioning, including hot, cold, wet and ambient states where required.
  • Peak transmitted acceleration and any standard-specific severity index or acceptance limit.
  • Retention-system displacement, failure and post-impact retention results.

Comparative Technical Specification

ParameterVG1 01.040ASTM F1163Snell E2021OEM Procurement Control
Market applicationEuropean riding-helmet conformity route; exact legal application depends on jurisdiction and current conformity legislationUnited States and other markets accepting ASTM equestrian headgear requirementsVoluntary higher-performance certification used by specialist manufacturers and buyersState the destination market and the exact revision in the RFQ
Nominal impact energy referenceCommonly specified around 60 J for the principal drop-impact sequenceCommonly specified around 60 J for principal impact testingUses Snell-defined impact velocities and headform conditions; do not reduce compliance to one Joule figureRequire the laboratory method, headform mass, velocity and anvil description
Impact acceptanceTransmitted acceleration, test location, retention and construction criteria under the applicable VG1 procedureASTM-defined acceleration, retention and construction criteria under the applicable revisionSnell-defined attenuation, retention and structural criteria, generally with a more severe voluntary test programObtain the complete report rather than a supplier summary sheet
Environmental conditioningSpecified conditioning states and test sequence must be taken from the adopted VG1 revisionASTM conditioning sequence and temperature or moisture exposures are revision-controlledSnell conditioning and pre-test requirements are certification-controlledRepeat validation after any material, liner-density or adhesive change
Outer shellMust remain serviceable and meet construction requirements after prescribed testingMust comply with ASTM shell, projection, visor and construction provisionsMust meet Snell geometry, penetration, impact and construction requirementsTypical OEM target: PC/ABS shell, 1.8–3.0 mm local wall range, with mold tolerance of approximately ±0.20 mm unless the laboratory drawing requires tighter control
Shock linerEnergy-absorbing liner must provide the required attenuation in the tested assemblyEnergy-absorbing liner must meet the ASTM performance of the complete helmetLiner must withstand the Snell impact and conditioning sequence without unacceptable attenuation lossUse molded EPS density mapping, typically 55–90 kg/m³ by zone, with density and bead-fusion records for every production lot
Retention systemRetention and strength assessed under the applicable VG1 procedureRetention-system strength and displacement assessed under ASTM procedureRetention performance assessed under Snell procedureFor development screening, specify a 1 kN dynamic retention-load target, but do not describe it as a substitute for the governing standard test

Shell Engineering: Polycarbonate, ABS and Composite Construction

The outer shell distributes localized contact, controls abrasion and protects the EPS liner from handling damage. It is not the principal energy absorber; the liner must crush at a controlled rate while the shell maintains sufficient integrity to prevent concentrated loading and liner displacement.

Polycarbonate Shells

Impact-grade polycarbonate is valued for high toughness, ductility and resistance to brittle fracture at low temperature. For an OEM helmet shell, the resin specification should identify virgin or approved recycled content, melt-flow range, UV stabilization, color masterbatch compatibility and flame or chemical restrictions where applicable. A typical PC shell target may use a nominal wall of 2.0–2.8 mm, with local rib, brim and vent geometry controlled by the mold rather than by post-molding trimming.

Polycarbonate is sensitive to stress cracking from incompatible cleaning chemicals, aggressive solvents and some pressure-sensitive adhesives. The buyer should approve the cleaning label, visor adhesive, paint system and strap-anchor insert before production validation.

ABS and PC/ABS Composite Shells

ABS provides good dimensional stability, surface finish and processability. A PC/ABS blend combines the toughness of polycarbonate with the moldability and appearance of ABS. The exact polymer ratio is formulation-dependent and must be identified by the resin supplier; a generic statement such as “high-impact ABS” is not a sufficient material specification.

For private-label production, require the resin grade, certificate of analysis, regrind percentage, injection temperature window, mold temperature, holding pressure, cooling time and shrinkage allowance. A practical dimensional-control target is ±0.30 mm for non-critical cosmetic features and approximately ±0.20 mm for shell-to-liner interfaces, subject to the certified mold drawing.

Shell Geometry and Ventilation

Vent apertures must not create an unverified weak section around the crown, temple or occipital region. Vent edges require controlled radii, clean de-flashing and adequate ligament width. No ventilation revision should be made after certification without engineering review because a larger aperture can alter shell stiffness, liner exposure and impact transmission.

EPS Shock-Liner Engineering

Expanded polystyrene is a cellular polymer that attenuates impact by controlled crushing. Its performance depends on density, bead fusion, cell structure, thickness, compression rate, temperature and the amount of permanent deformation already present.

Helmet liners should be designed with zoned density rather than one nominal density for the complete headform. A typical development range is:

  • Primary crown and frontal zones: approximately 65–90 kg/m³, depending on the certified design and required crush distance.
  • Side and temporal zones: approximately 55–75 kg/m³ where geometry permits greater crush travel.
  • Occipital zones: approximately 60–85 kg/m³, controlled around the retention anchors and rear shell profile.

These figures are engineering targets, not a replacement for the density and attenuation requirements of VG1, ASTM F1163 or Snell E2021. A thicker liner is not automatically safer. If density is excessive, the liner may transmit a high acceleration pulse instead of crushing progressively. If density is too low, the liner may bottom out against the headform.

Production control should include density by lot, bead-fusion inspection, dimensional inspection after conditioning, liner-to-shell seating, void inspection and compression-set monitoring. EPS components should not be bonded with adhesives that attack polystyrene or create hard stress concentrations.

Harness, Buckle and Retention-System Engineering

The harness must retain the helmet without excessive movement while avoiding concentrated pressure beneath the mandible or around the ears. A four-point harness normally comprises two lateral strap paths, a rear or occipital stabilizing path and a chin connection with an adjustable buckle system. The exact architecture must remain consistent with the certified model.

For OEM development, specify the following measurable controls:

  • Polyester or polyamide webbing width, thickness, weave and elongation.
  • Webbing breaking strength and abrasion resistance by lot.
  • Stitch pattern, bartack length, stitch density and thread specification.
  • Anchor-point pull strength and shell-interface reinforcement.
  • Buckle material, corrosion resistance, release force and adjustment range.
  • Dynamic retention screening under a 1 kN load target, while recognizing that this screening value is not a universal replacement for the relevant VG1, ASTM or Snell retention test.

A practical development specification may call for 15–25 mm polyester webbing with a minimum certified breaking strength above the expected retention load and a controlled elongation range. The final acceptance value must be established against the selected standard and the laboratory’s fixture, loading rate and displacement criteria.

Metallic buckle components may be produced in AISI 420 stainless steel where hardness, corrosion resistance and clean stamped or machined edges are required. Typical heat-treated AISI 420 targets are approximately 48–52 HRC for wear-resistant components, subject to geometry and corrosion requirements. Where higher toughness is more important than hardness, the tempering cycle must be adjusted and documented.

Metallurgy and Adjacent Equestrian Hardware

Helmet buckles, strap adjusters and visor fasteners should be free of sharp projections and should maintain function after sweat, humidity and cleaning exposure. For adjacent equestrian hardware, Equestrian Max can also specify:

  • High-copper German Silver or Argentan: typically approximately 60–65% copper, 15–20% nickel and the balance zinc, with the exact composition confirmed by the selected mill certificate. Common nominal formulations such as Cu 60%, Ni 20%, Zn 20% should not be assumed unless stated in the purchase order.
  • AISI 420 stainless steel: chromium-bearing martensitic stainless steel commonly containing approximately 12–14% chromium and about 0.15–0.40% carbon, with the balance principally iron and controlled minor elements.
  • Chrome Vanadium drop-forgings: typically based on alloy families containing approximately 0.80–1.10% chromium and 0.15–0.30% vanadium, with carbon and manganese set by the selected grade. The actual chemistry must be verified by mill certificate and spectrometric inspection.

These materials are especially relevant to horse bits and bridles, stirrup hardware, buckles, farrier tools and equine dental instruments. They should not be substituted into a certified helmet component unless the complete helmet assembly is revalidated.

Leather Engineering for Complementary Saddlery Programs

Helmet harnesses are normally manufactured from synthetic webbing, but a B2B buyer ordering a coordinated riding equipment range may require leather brims, sweatband covers, helmet bags, bridles or saddle components. Equestrian Max can specify vegetal drum-dyed Argentine cowhide for these products.

A controlled leather specification should include:

  • Argentine cowhide, full-grain or selected top-grain, with the grade stated before cutting.
  • Vegetable tanning in a controlled drum process, followed by drum dyeing for through-color penetration.
  • Finished thickness of approximately 2.2–2.6 mm for structured bridle or trim components, with a normal tolerance of ±0.15 mm after conditioning.
  • Moisture content target of approximately 12–16% at 20–25°C and 50–65% relative humidity before cutting.
  • pH target generally around 3.5–4.5 for finished vegetable-tanned leather, confirmed by the buyer’s agreed test method.
  • Flex resistance, tear strength, stitch tear resistance, colorfastness to wet and dry rubbing, and dimensional shrinkage after humidity conditioning.

Leather must never be used to imply helmet certification. It is a trim or adjacent tack material unless the complete helmet design has been assessed with that material installed.

Cooling Airflow Channel Aerodynamics

Ventilation must remove heat and moisture without compromising shell continuity or exposing the EPS liner. The relevant design objective is a controlled pressure path from front or lower intake vents through internal channels toward upper and rear exhaust vents.

Airflow performance is affected by vent area, channel cross-section, inlet-to-outlet pressure differential, rider velocity, headform boundary layer and the fabric or hair covering beneath the helmet. At low riding speeds, natural convection and pressure differences are limited; at higher speed, front-facing intake vents can generate useful ram pressure but may also increase wind noise.

For development comparison, record:

  • Total free vent area, excluding grille material and decorative apertures.
  • Hydraulic diameter and cross-sectional area of each internal channel.
  • Vent edge radius and grille open-area percentage.
  • Pressure drop across the helmet at defined air velocities, for example 2, 5 and 10 m/s.
  • Temperature and relative-humidity change between inlet and exhaust zones using a repeatable heated-headform test.
  • Condensation or sweat accumulation after a defined riding-duration simulation.

Vent channels should avoid abrupt dead ends, sharp internal steps and narrow sections likely to collect dust or cleaning residue. A nominal internal channel height of approximately 8–15 mm may be practical in a development model, but the certified helmet geometry—not a generic airflow target—controls the final design.

Sialkot Manufacturing and Quality-Control Checkpoints

Incoming Material Inspection

  • Verify polymer resin grade, batch number, moisture content and certificate of analysis.
  • Check EPS bead or pre-expanded block density, fusion quality and lot traceability.
  • Verify webbing width, thickness, tensile strength, colorfastness and elongation.
  • Inspect metal buckles and adjusters for alloy identification, burrs, corrosion and dimensional conformity.
  • For leather accessories, measure thickness at multiple points and confirm moisture, pH and dye penetration.

In-Process Molding Inspection

  • Record injection temperature, mold temperature, holding pressure, cooling time and cycle number.
  • Inspect shell wall thickness by calibrated ultrasonic gauge or approved sectioning method during first-article validation.
  • Check vent aperture dimensions, shell symmetry, visor interface, edge radii and flash removal.
  • Measure EPS density and liner dimensions at defined coordinates rather than relying on total part weight alone.
  • Confirm adhesive coverage and cure time without contamination of the EPS surface.

Assembly and Final Inspection

  • Verify shell-to-liner seating, absence of gaps, liner compression and harness anchor alignment.
  • Measure headform fit range, rear adjustment travel and chin-strap adjustment range.
  • Check buckle release, strap routing, bartack position and stitch security.
  • Inspect markings, size labels, standard references, care instructions, batch code and serial traceability.
  • Conduct visual and dimensional inspection at a defined sampling level, with 100% inspection of safety-critical retention components.

Durability and Verification Testing

Before shipment, the buyer should approve a validation plan covering impact samples, environmental conditioning, retention screening, buckle cycling, visor loading, sweat or salt exposure, cleaning-chemical compatibility and packaging compression. Certification testing must be completed by the competent laboratory for the selected standard. Internal Sialkot testing is valuable for process control, but it does not replace third-party certification.

Any of the following changes should trigger an engineering review and possible re-test: shell resin substitution, wall-thickness change, vent enlargement, EPS-density change, liner geometry change, adhesive substitution, harness-anchor relocation, buckle redesign, visor change or alteration of the size range.

Buyer RFQ and OEM Ordering Checklist

  1. Destination market: identify the countries of sale and whether the requirement is VG1 01.040, ASTM F1163, Snell E2021 or a combination.
  2. Standard revision: state the exact revision and whether the laboratory must be accredited or recognized by a named authority.
  3. Helmet configuration: provide shell size, head-size range, visor type, vent layout, liner geometry, harness configuration and adjustment system.
  4. Material schedule: specify PC, ABS or PC/ABS resin grade; EPS density zones; webbing material; buckle alloy; visor polymer; adhesive and surface finish.
  5. Dimensional tolerances: include shell-to-liner fit, vent dimensions, wall thickness, harness anchor location and visor alignment.
  6. Retention requirement: state the applicable standard test and any internal 1 kN dynamic screening target without confusing the latter with formal compliance.
  7. Testing documents: require laboratory reports, certificates, declarations, size coverage, model number and production revision.
  8. Traceability: require batch coding on shell, liner or label, retained samples, material certificates and a change-control procedure.
  9. Quality plan: define first-article approval, pre-production sample approval, inline inspection, final AQL or sampling plan and non-conformance handling.
  10. Packaging: specify carton compression, individual protective bags, care instructions, multilingual labels and protection against liner deformation during transport.
  11. Private-label requirements: provide artwork for logos, warning labels, size charts, barcode data and the legal importer or responsible economic operator details.
  12. Replacement policy: specify recommended replacement after a significant impact and the buyer’s policy for visibly damaged, dropped or chemically contaminated helmets.

Helmet procurement is often more efficient when incorporated into a complete riding-equipment program. Equestrian Max supports OEM and ODM buyers across equestrian products, English saddles and saddlery, horse bits and bridles, farrier and hoof-care tools and equine dental instruments.

For a helmet development quotation, provide the target standard, required sizes, annual volume, shell finish, vent design, liner construction, harness specification, packaging language and test-document requirements. Contact the Equestrian Max technical team through the OEM and wholesale enquiry page for a controlled RFQ review and production feasibility assessment.

Technical Author & Specialist Review

Claire Pemberton

FEI Horse Bit Metallurgy & Tack Procurement Specialist

Reviewed against FEI tack regulations, high-copper German Silver bit metallurgy, Chrome-Vanadium farrier forging, and equine dental standards.